Hot dip baja galvanis Listrik Fitting
Informasi Produk
1. Beda panggonan ditrapake
1. Nll-2 strain clamp: ditrapake kanggo 10kV lan ngisor garis nduwur sirah.
2. Nld-2 strain clamp: digunakake kanggo sudhut, sambungan lan sambungan terminal. Kawat baja lapis aluminium spiral nduweni kekuatan tarik sing kuwat banget lan ora ana stres konsentrasi, sing nduweni peran kanggo nglindhungi lan mbantu nyuda getaran kabel optik.
2. Fungsi sing beda-beda
1. Nll-2 tension clamp: ndandani kabel aluminium terdampar utawa kawat baja inti aluminium terdampar ing rod tension. Nalika digunakake kanggo konduktor aluminium terisolasi nduwur sirah, digunakake bebarengan karo tutup insulating kanggo pangayoman jampel.
2. Nld-2 tension clamp: digunakake kanggo ndandani konduktor utawa kabel kilat ing senar insulator tension saka kutub non-linear lan menara kanggo anchoring. Iki uga digunakake kanggo ndandani kabel tetep saka tiang kabel lan menara.
3. Beda ciri
1. Nll-2 strain clamp: awak ngawat-ngawati digawe saka dhuwur-kekuatan aluminium alloy, karo katon Gamelan, urip dawa, instalasi trep lan nggunakake lan ora mundhut daya. Iku produk certified hemat energi.
2. Nld-2 tension clamp: Tension pre twisted wire and supporting connecting fittings. Kekuwatan genggeman clamp kudu ora kurang saka 95% saka kekuatan tarik kabel optik, sing trep lan cepet dipasang lan nyuda biaya konstruksi. Iki ditrapake kanggo garis kabel optik ADSS kanthi span ≤ 100m lan sudut garis
W Series SOCKET EYE | ||||||||
Data dhasar | ||||||||
Jinis | Ukuran (mm) | Ukuran kopling | Kekuwatan kantilever (kn) | Bobot (kg) | ||||
Phi | b | H | A | B | ||||
W-7A | 20 | 16 | 70 | 34.5 | 19.2 | 16 | 70 | 0.80 |
W-7B | 20 | 16 | 115 | 34.5 | 19.2 | 16 | 70 | 0.92 |
W-10 | 20 | 18 | 85 | 34.5 | 19.2 | 16 | 100 | 0.90 |
W-12 | patlikur | 20 | 85 | 34.5 | 19.2 | 16 | 120 | 1.30 |
W-30 | 39 | 32 | 110 | 51.0 | 27.5 | patlikur | 300 | 3.50 |
Data dhasar | |||||||||
Jinis | Ukuran (mm) | Ukuran kopling | Kekuwatan kantilever (kn) | Bobot (kg) | |||||
d | Phi | b | H | D | D1 | ||||
Q-7 | 17 | 18 | 16 | 50 | 33.3 | 17 | 16 | 70 | 0.27 |
QP-7 | 17 | 20 | 16 | 50 | 33.3 | 17 | 16 | 70 | 0.30 |
QP-10 | 17 | 20 | 16 | 50 | 33.3 | 17 | 16 | 100 | 0.32 |
QP-12 | 17 | patlikur | 18 | 50 | 33.3 | 17 | 20 | 120 | 0.40 |
QP-12G | 17 | patlikur | 17 | 50 | 33.3 | 17 | 16 | 120 | 0.40 |
QP-16 | rong puluh siji | 26 | 20 | 60 | 41 | rong puluh siji | 20 | 160 | 0.50 |
QP-20 | 25 | 26 | patlikur | 80 | 49 | 25 | patlikur | 200 | 0.95 |
QP-21D | rong puluh siji | 30 | patlikur | 80 | 41 | rong puluh siji | 20 | 210 | 0.90 |
QP-30 | 25 | 39 | 28 | 80 | 49 | 25 | patlikur | 300 | 1.05 |
QH Series BALL EYE | |||||||||
Data dhasar | |||||||||
Jinis | Ukuran (mm) | Ukuran kopling | Kekuwatan kantilever (kn) | Bobot (kg) | |||||
R | b | H | H1 | D | D1 | ||||
QH-7 | 12 | 16 | 100 | 57 | 33.3 | 17 | 16 | 70 | 0.6 |
QH-10 | 12 | 16 | 110 | 60 | 33.3 | 17 | 16 | 100 | 1.1 |
QH-12 | 11 | 19 | 90 | 45 | 33.3 | 17 | 16 | 120 | 1.1 |
QH-16 | 13 | 18 | 127 | 80 | 41.0 | rong puluh siji | 20 | 160 | 1.3 |
QH-21 | 16 | 20 | 150 | 80 | 41.0 | rong puluh siji | 20 | 210 | 1.3 |
QH-30 | 17 | rong puluh loro | 150 | 98 | 49.0 | 25 | patlikur | 300 | 1.7 |
U Series Shackle | |||||||
Data dhasar | |||||||
Jinis | Ukuran (mm) | Kekuwatan kantilever (kn) | Bobot (kg) | ||||
C | M | d | H | R | |||
U-7 | 20 | 16 | 16 | 80 | 10 | 70 | 0.44 |
U-10 | rong puluh loro | 18 | 18 | 85 | 11 | 100 | 0.54 |
U-12 | patlikur | rong puluh loro | 20 | 90 | 12 | 120 | 0.96 |
U-16 | 26 | patlikur | rong puluh loro | 95 | 13 | 160 | 1.47 |
U-21 | 30 | 27 | 25 | 100 | 15 | 210 | 2.20 |
U-25 | 34 | 30 | 28 | 110 | 17 | 250 | 2.79 |
U-30 | 38 | 36 | 30 | 130 | 19 | 300 | 3.75 |